您好，Qingzhou Bangyuan Agriculture & Animal Husbandry Machinery Co., Ltd.网站欢迎您！
inHeavy hammer fanDuring the maintenance process, qualified lubricating oil needs to be used, and the amount is strictly controlled so that it can play a certain role in protecting the bearings of the fan. In the process of changing lubricants, the machinery needs to be cleaned and dried,So that the lubricant can adapt to the working environment. Check the operation of the impeller in detail, and use a brush or other tools to clean the dust in time to prevent adverse effects on the fan. In addition, the items placed around the fan are also planned for safety, keeping the air path smooth and ensuring that it can play an active role. For the defective parts found in the maintenance process, they should be replaced in time, so as not to stop the whole heavy hammer fan from working due to damaged parts. It is also necessary to start the motor and test the running conditions to ensure that it is in good condition and the circuit is normal. Once problems are found, they should be resolved in time.
Operation failure detection:
During the maintenance process, some fan failures are more pronounced in the startup phase. Therefore, in order to be able to understand the operation status of the fan, it is necessary to perform a start-up test on the fan, and check whether there is any abnormal noise during the start-up process, and the time to reach the specified speed, etc. are the reference indicators reflecting the performance of the fan. And for the maintenance of complex heavy hammer fans. It is necessary to be familiar with its operating procedures, and pay special attention to the impeller. This is the key part of the fan. Its direction and other parameters must meet the relevant standards. If problems occur, measures need to be taken to remedy the The fan can be operated well. In addition, it is necessary to make a timely record of the fault handling, so that the next time you perform maintenance, you can focus on tracking, so as to obtain better maintenance results.
5 09, 2020
4 30, 2020