您好,Qingzhou Bangyuan Agriculture & Animal Husbandry Machinery Co., Ltd.网站欢迎您!

咨询热线

15169506588

您的位置:Home > Industry knowledge > Content

Introduction of maintenance mechanism and matters needing attention of push-pull fan

2020-04-03

  1.Establish regular maintenance and maintenance mechanisms

In order to keep the performance of the push-pull fan in good condition, to avoid failure due to improper maintenance,The maintenance cycle needs to be reasonably arranged according to the operating environment of the fan. If the working environment is good, the maintenance cycle can be appropriately increased. If the environment is poor, the maintenance cycle needs to be shortened. In addition, since there are a certain number of fans in the plant, it is necessary to formulate a corresponding maintenance plan so as not to occupy production time as much as possible. If it cannot be exempted, it is necessary to arrange the maintenance sequence reasonably so as not to cause a bad influence on the production link. In the maintenance process of push-pull fans, some maintenance rules are required, and more experienced maintenance personnel are organized to summarize the problems that often occur in the daily maintenance process and organize them into a booklet so that employees can obtain the operation procedures get on. So as to obtain a more ideal maintenance effect.

  2.Maintenance considerations analysis

In the actual maintenance process, in order to have a deeper understanding of the operation status of the fan, it is necessary to record the maintenance and repair and treat it as-These strict systems are followed well. In this way, you can understand the operation status of the fan. If a problem occurs repeatedly, you need to pay special attention to it and pay attention to it and record its maintenance in detail. . During the maintenance process, the stability of the push-pull fan operation is required.Check the oil seal of the bearing box and the temperature of the bearing and other components. When there is a problem, they should be replaced in time to ensure the normal operation of the fan. When the operating temperature reaches40At degrees Celsius, you need to use an axial fan to do the corresponding cooling treatment. Thereby increasing the service life of the fan.

Related News

Product Recommended

  • Cooling fan
  • Cooling wet curtain
  • Gas hot blast stove
  • Cowshed fan
  • Chicken house fan
  • Negative pressure fan