installationFarming and animal husbandry fanAt this time, the wall on the side of the fan must be sealed. Especially there should be no gaps around the fan. A good way to install is to close the doors and windows near the wall. Open the doors and windows of the wall opposite the fan to ensure a straight air flow.

　　1, before installation

① Before installation, carefully check whether the fan is intact, whether the bolts of each fastener are loose or fall off, and whether the impeller collides with the wind hood. Carefully inspect the blades or shutters for deformation or damage during transportation.

②When installing and selecting the air outlet environment, it should be noted that there should be no excessive obstacles in the range of 2. 5-3M on the opposite side of the air outlet.

　　2, during installation

① Stable installation: pay attention to the horizontal position of the fan when installing the farming and animal husbandry fan, and adjust it to the stable level of the fan and the foundation. After installation, the motor must not tilt.

②When installing, the adjustment bolt of the motor should be placed in a convenient position. It is convenient to adjust the belt tension during use.

③When installing the support, the support and foundation plane must be stable. Install angle iron reinforcement next to the fan when needed.

④After installation, check the tightness around the fan. If there is a gap, it can be sealed with solar panels or glass glue.

　　3, after installation

①After installation, check whether there are tools and debris inside the fan. Move the fan blade by hand or lever to check whether there is over-tightness or friction, whether there is any object that hinders the rotation, and whether there is any abnormal phenomenon, you can start the trial operation.

②During operation, when the fan has vibration or the motor has “buzzing” abnormal noise or other abnormal phenomena, it should be shut down for inspection and started after repair.

The installation of farming and animal husbandry fans is an important project and has a great impact on future use. Always pay attention during the entire installation process.